Electric Hoists / NER Food Grade Electric Hoists
Get a Quote

NERM-FG Food Grade Electric Trolley Hoist

Food Grade Power

NERM-FG trolley hoists come loaded with standard food grade features and have a full menu of options to suit individual facility requirements. This is the solution for any location where incidental contact with product is a concern. 

Manage Movement

Our MR-FG trolley pairs nicely with our NER-FG hoist for the perfect food grade solution when you need to move product as well as lift.

FDA Approved Food-Safe Oil, Grease and Lubricants

Our NER-FG hoist uses FDA approved grease and oil on the load chain and in the gearbox to comply with pharmaceutical, beverage, and food-associated processing plant non-toxic lubrication requirements.

Corrosion-Resistant Nickel-Plated Load Chain

The nickel-plated load chain on Harrington’s electric food-grade hoist is engineered to stand up to corrosion in environments where damp air or steam are prevalent.

Heavy-Duty Hook Latch

Heavy-duty hook latch secures the load.

Standard Side Guide Rollers and Drop Stops

Four ball bearing supported side-guide rollers enhance smooth trolley motion and reduce wear of the wheels and beam. Built-in drop stops will provide security for the operator and the equipment.

Food Grade Hoist

Harrington's N/ER Food Grade hoists are perfect for any facility where incidental contact with product is a concern.

CAPACITY
  • 1/4 - 2 Ton
VOLTAGE
  • 208-230/460-3-60V
COMPLIANCE
  • ANSI/NFPA 70, “National Electrical Code”
  • ANSI/ASME B30.16, “Safety Standard—Overhead Hoists (Underhung)”
  • ANSI/ASME HST—1M, “Performance Standard for Electric Chain Hoists”
  • OSHA Section 1910.179 of Title 29, “Occupational Safety and Health Regulations—Overhead and Gantry Cranes”
  • ANSI/ASME B30.11, “Safety Standard—Monorails and Underhung Cranes”
  • ANSI/ASME B30.17, “Safety Standard—Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist)”
STANDARD FOOD GRADE FEATURES
  • Food grade oil and grease
  • White epoxy paint
  • Nickel-plated load chain
  • Lubricants comply with FDA standards
  • Features stainless steel and nickel-plated components
BODY
  • Die cast aluminum
  • Completely sealed suitable for both indoor and outdoor applications, including harsh environments
  • Gaskets throughout the hoist provide for an IP55 rating
LOAD CHAIN
  • Grade 80
  • High-performance nickel-plated load chain
  • FDA approved oil
HOOKS
  • Forged carbon steel hooks will open gradually and not fracture under excessive loads
  • Ball bearings produce smooth rotation
  • Bottom hook will swivel 360 degrees
  • Top and bottom hooks have heavy-duty hook latch
CONTROLS
  • Pendant
  • 110 volts
  • Simple to operate plug-in connectors
PUSH BUTTON PENDANT
  • Rated IP65
  • Standard control voltage is 110V
  • Strain relief wire is molded to pendant cord for added support and dependability
  • 4-button (momentary contacts) with emergency on/off (maintained contacts)
  • E-stop is standard on all 4-button pendants
BRAKE
  • “The Guardian”: Smart Brake Technology
  • Revolutionary DC current motor brake with electrical failsafe design
  • 10 year warranty
MOTOR
  • Totally enclosed fan-cooled (TEFC)
  • Motor fin, fan blade and fan cover design cools the motor and brake
OPERATING CONDITIONS
  • Recommended for -4° to +104° F and humidity of 85% or less
FOOD GRADE OPTIONS
  • Stainless steel bottom hook
  • Stainless steel trolley wheels
  • Stainless steel side guide rollers
  • Nickel-plated shaft and suspender
  • Stainless steel or plastic chain container
  • NEMA 4 pendant
  • Pendant cover
  • Stainless steel chain spring and limiting plate
  • Stainless steel cushion rubber
  • Nickel-plated stopper
OPTIONS
  • Longer lift or pendant length
  • 24V control