EQP Electric Trolley Hoist - 3 Phase

Easy Lifting

Pair Harrington’s EQ Series three-phase dual speed (VFD Control) electric chain hoist with our PT push trolley to create an easy and economical method of transporting the load. This combination is ideal for workstations and infrequent moves.

Unique Chain Guide

Provides quiet and smooth guiding of chain. Heavy cast iron construction for improved wear versus stamped steel design offered by many manufacturers.

Self-Adjusting Maintenance-Free Brake

Equipped with our pull-rotor motor brake, the EQ has no brake coil to fail or discs to replace, making it virtually maintenance free.

Variable Frequency Drive (VFD)

All models come with a standard “under-the-cover” variable frequency drive – regardless of voltage. This device works by varying the power to the motor, which allows you to adjust both the high and low speeds. It also provides a soft-start/soft-stop operation to reduce shock loads, swing, and bounce – resulting in more precise load control and longevity of the hoist.


When working with less than 30% of the full rated capacity, the EQ can operate 1.3 times faster, optimizing your work efficiency and production time.

Stamped Steel Side Plates

Engineered to be lightweight and easy to install, our trolleys are specifically designed to be robust and durable, without unnecessary weight and bulkiness.

  • 1/8 - 1 Ton
  • (208-230)-3-50/60
  • (380-460)-3-50/60
  • UL 508, 508A, 1004
  • CSA C22.2 NO.33,14-13, 66
  • ANSI/NFPA 70, “National Electrical Code”
  • ANSI/ASME B30.16, “Safety Standard—Overhead Hoists (Underhung)”
  • ANSI/ASME HST—1M, “Performance Standard for Electric Chain Hoists”
  • OSHA Section 1910.179 of Title 29, “Occupational Safety and Health Regulations — Overhead and Gantry Cranes”
  • ANSI/ASME B30.11, “Safety Standard—Monorails and Underhung Cranes”
  • ANSI/ASME B30.17, “Safety Standard—Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist)”
  • ASME H4
  • ISO 1/8-1/2T M6; 1T M5
  • FEM 1/8-1/2T 3m; 1T 2m
  • Gaskets throughout the hoist provide for a IP55 rating
  • Die-cast aluminum
  • Completely sealed body for for both indoor and outdoor applications, including harsh environments
  • Low headroom
  • Paint is electrostatically applied
  • Plastic chain container standard
  • Precision machined helical gears immersed in oil bath lubrication for quiet, smooth and cool operation
  • Ultra-strong high-performance and corrosion resistant nickel-plated
  • Grade 80 DIN chain
  • Pendant control
  • Under-the-cover VFD standard
  • Forged carbon steel
  • Open gradually without fracturing under excessive loads
  • Bottom hook swivels 360 degrees
  • Top and bottom hooks have heavy-duty hook latch
  • Rated IP65
  • Standard control voltage is 24VDC
  • Strain relief wire is molded to pendant cord for added support and dependability
  • 2-button (momentary contacts) with emergency On/Off (maintained contacts)
  • E-stop is standard on all pendants
  • Extremely durable and reliable pull-rotor motor brake
  • Contains no brake coil to fail like conventional disc brakes
  • Totally enclosed fan-cooled (TEFC)
  • External motor fan quickly eliminates resistor, motor and brake heat
  • 30/10-minute duty rating, H4 classification, Class B insulation, cooling fins and external thermal motor protection
  • Drop Stops
  • Shafts fit wide flange range and have spacers for easy adjustments
  • All steel wheels have sealed ball bearings and will fit a flat or tapered beam flange
  • Recommended for -4° to +104° F and humidity of 85% or less
  • Longer lift or pendant lengths
  • Bumpers
  • Longer shafts for wider beams
  • Longer lift canvas chain containers