TCK Air Hoist

The Hoist that Just Keeps Going

With 100% duty rating, fine-feathering controls, and reduced noise levels, there’s no question the TCK will meet all your production needs. For low headroom and fast lifting in demanding industrial settings, these hoists will far exceed workplace demands.

Adjustable Overload Limiter

Adjustable load limiter detects overload automatically and blocks air flow for lifting.

Unlimited Duty Cycle

The TCK has an unlimited duty cycle built for long and demanding work shifts. You can continually operate the hoist without worrying about damage from too many starts per hour, allowing you to get the work done on your schedule.

Reduced Noise Levels

Achieve quiet operation and dampened noise levels with the external muffler. The TCK’s air-tight body contributes to its comfortable noise levels and efficient use of air.

Very Fine Feathering Control

The spring-loaded, multi-vane motor design allows you to place and position a load exactly where you need it. Gradually control the lift with very fine feathering movements both up and down, even at low speeds.

Paddle Style Limit

TCK air-powered hoists come standard with top quality features such as a paddle-style limit. When lifting the load, the paddle-style limit keeps the bottom hook from running up into the the hoist and causing damage to the hoist body.

Centralized Pendant Hose

TCK air-powered hoist features a centralized pendant hose. This simple design protects the pendant hose from being damaged during transportation or installation of the hoist.

Cast Mounting Port

The TCK air-powered hoist features a cast mounting port. The mounting port allows for safe and easy installation of the hoist using a shackle, sling, or wire rope, making it the perfect choice when secondary support of the hoist body and load is required.

CAPACITY
  • 3 & 6 Ton
BODY
  • High-strength cast-iron housing stands up to the toughest demands
  • Powder coated finish
  • Proven weather resistant in harsh environments
LOAD CHAIN
  • Nickel plated, corrosion-resistant chain
  • Resistant to corrosion, abrasion and wear
AIR REQUIREMENTS
  • Air Supply: 60 – 90 psi
  • Air Filtration: Maximum 5 micron air filter or finer required
  • Air Inlet Port: 1" NPT
  • Air Supply Hose: Minimum Size 3/4"
  • Air Lubrication: Minimum 10 – 15 drops of oil per minute (0.2 – 0.3 cc/min.)
OPERATION
  • Pendant and cord control
  • Outstanding control for fine feathering movements using a spring-loaded multi-vane motor design
  • Comfortable noise levels during use
BRAKE
  • Fail-safe self-adjusting disc brake
  • Protected from harsh environments
MOTOR
  • Spring-loaded multi-vane
  • Variable speed control
OPERATING CONDITIONS
  • Temperature range +14° – 140°F
OPTIONS
  • Pendant or cord control
  • Canvas or steel chain container
  • Custom lift or pendant length