Electric Hoists / NER Food Grade Electric Hoists
Solicite una Cotización

NER-FG Food Grade Electric Hoist

Work Clean with Confidence

For lifting applications in food, beverage, and pharmaceutical industries—where maintaining a pristine environment is critical—our NER food-grade electric chain hoist is the one to choose. With it's FDA approved food-grade lubricants, white epoxy paint, stainless steel /nickel-plated hardware, and a nickel-plated load chain, this hoist works best in contaminant-controlled or corrosive processing environments.

Corrosion-Resistant Nickel-Plated Load Chain

The nickel-plated load chain on Harrington’s electric food-grade hoist is engineered to stand up to corrosion in environments where damp air or steam are prevalent.

Chip Resistant Epoxy Paint

Epoxy paint on the NER Food Grade hoist body protects you from debris that could contaminate your processing facility.

Chip Resistant Bottom Hook

Since the bottom hook can come into direct contact with products, food-grade features like the chip-resistant paint on the bottom hook of the NER Food Grade are designed to resist potential contamination from flaking and chipping.

FDA Approved Food-Safe Oil, Grease and Lubricants

Pharmaceutical, beverage, and food-associated processing plants require equipment that uses non-toxic lubrication. Our NER-FG hoist uses FDA approved grease and oil on the load chain and in the gearbox.

Stainless Steel and Nickel-Plated Components

The standard food-grade features on the NER include stainless steel and nickel-plated hardware that resists rust or corrosion.

Food Grade Hoist

Harrington's N/ER Food Grade hoists are perfect for any facility where incidental contact with product is a concern.

CAPACITY
  • 1/4 - 2 Ton
VOLTAGE
  • 208-230/460-3-60V
COMPLIANCE
  • ANSI/NFPA 70, “National Electrical Code”
  • ANSI/ASME B30.16, “Safety Standard—Overhead Hoists (Underhung)”
  • ANSI/ASME HST—1M, “Performance Standard for Electric Chain Hoists”
STANDARD FOOD GRADE FEATURES
  • Food grade oil and grease
  • White epoxy paint
  • Nickel-plated load chain
  • Lubricants comply with FDA standards
  • Features stainless steel and nickel-plated components
BODY
  • Die cast aluminum
  • Completely sealed suitable for both indoor and outdoor applications, including harsh environments
  • Gaskets throughout the hoist provide for an IP55 rating
LOAD CHAIN
  • Grade 80
  • High-performance nickel-plated load chain
  • FDA approved oil
HOOKS
  • Forged carbon steel hooks will open gradually and not fracture under excessive loads
  • Ball bearings produce smooth rotation
  • Bottom hook will swivel 360 degrees
  • Top and bottom hooks have heavy-duty hook latch
CONTROLS
  • Pendant
  • 110 volts
  • Simple to operate plug-in connectors
PUSH BUTTON PENDANT
  • Rated IP65
  • Standard control voltage is 110V
  • Strain relief wire is molded to pendant cord for added support and dependability
  • Single speed: 2-button (momentary contacts)
  • Dual speed: 2-button (momentary contacts) with emergency On/Off (maintained contacts)
  • E-stop is standard on all 2-button dual speed pendants
BRAKE
  • “The Guardian”: Smart Brake Technology
  • Revolutionary DC current motor brake with electrical failsafe design
  • 10 year warranty
MOTOR
  • Totally enclosed fan-cooled (TEFC)
  • Motor fin, fan blade and fan cover design cools the motor and brake
OPERATING CONDITIONS
  • Recommended for -4° to +104° F and humidity of 85% or less
FOOD GRADE OPTIONS
  • Stainless steel bottom hook
  • Stainless steel or plastic chain container
  • NEMA 4 pendant
  • Pendant cover
  • Stainless steel chain spring and limiting plate
  • Stainless steel cushion rubber
  • Nickel-plated stopper
OPTIONS
  • Longer lift or pendant length
  • 24V control